Login
Sign Up
Since 1923
257
Konca
PN: KH900              
Construction
High grade, cast aluminum enclosure, with stainless steel hardware. The diffuser is formed with UV-stabilized, opal-white acrylic.
Lamping
Operates with a Cree™ 19W LED (CRI 80) source; specify 3000K, 3500K or 4000K CCT. The source is wired directly to the integral driver.
LED Driver
The LED source is controlled by an advanced, integral electronic driver that delivers consistent power.
Diffuser
The standard opal-white diffuser is formed with UV-stabilized acrylic, and secured into the enclosure. The sand-blasted acrylic diffuser is optional.
Surge Suppressor
All 120V, 277V, and universal voltage fixtures are equipped with a 6kV surge suppressor.
Dimming
Optional LED dimming uses 0-10V current-sinking control, with pulse width modulation (PWM), to ensure consistent color through dimming phases.

Note: Use a current-sinking dimming system (by others) for LED dimming.
Compatibility of this product is not guaranteed with all control systems.

Emergency
An optional, remote emergency back-up is available, in the standard or cold pack type.

Note: The test switch would be installed remotely.
EMR Remote LED: (20 ft. / 6.096 m max. distance from EM to LED; min. operating temp. +5C/+40F; dry location)
EMCR Remote LED with Cold Pack: (20 ft. / 6.096 m max. distance from EM to LED; min. operating temp. -20C/-4F)

Finish
Available in several TMS polyester powder-coated finishes; see the “Finishes and Diffusers” chart.
Custom RAL finishes are available by special order.
Mounting
Mount on a flat wall, directly over a standard 4” electrical junction box. Using the supplied gasket, the fixture must be sealed to the wall to maintain the wet location rating.
Follow the installation instructions, and adhere to the local electrical code.
Compliances
QPS-C/US, or UL-C/US certified to UL1598 standards, and the Americans with Disabilities Act (ADA). Rated IP55 for dry to wet, indoor and outdoor locations.
The Consultants Europe (CE) listing is available upon request.
facts
configure